Offline demo instructions

1. Contact ACE sales for password.
   
2. Download demo 1.9035.zip
   
3. Using the password provided unzip file and run.
   
4. Follow the installation, the last page has two tick boxes one for loading the mach kernel into memory and the second to load the English wizards unselect the wizards box.  Failure to do so will load a lot of wizards that have no use and will only muddle the issue.
   
5. When loaded the software requires a system re-boot.
   
6. Re-boot system and start the software using the ACE-KISS icon.
   
7. Upon startup, you will need to invert the e-stop input (as you don't have one).
   
1. Open the config menu.
   
2. Select the ports and pins item.
   
3. Open the input signals tab.
   
4. Scroll down until the E-STOP input is shown.
   
5. Move to the right until the active low variable is found.
   
1. Click on the "x" it will change to a check mark
   
2. Click on the apply button to set.
   
8. Reboot system and start the software using the ACE-KISS icon.