KISS-101A
DESCRIPTION:
The KISS-101A is by far the lowest cost automated selective soldering machine available using the proven ‘traveling mini–solder wave" soldering process. The KISS-101A couples high throughput with precise process controls. The programmable features provide the tools to set all process parameters, including immersion depths, pre-heat dwells, travel distances and speeds, solder temperature and wave height. Once set, the system will repeat precisely.
The machine will apply flux and solder to boards up to 12" x 12" (requires manual step-over to reach full 12" stroke when the automated fluxing option is installed).
PROCESS OVERVIEW:
The operator places the pre fluxed PCB (auto fluxing is available) onto the location rails and starts the automated cycle. The the mini solder wave is automatically moved under the component to be soldered. The solder nozzle rises to "wet" the first pins. The solder wave travels the length of the component soldering the through hole leads to the PCB. At the completion of the travel the solder pot lowers and moves to the next site. All programmed sites are soldered in the same cycle. An automated stepping function allows solder arrays of boards in an X-Y matrix. After completing the cycle the pot returns to the start position ready for the next cycle.
Please view the data sheet, the machine video and the process videos for a better understanding of the machine and the process.
The KISS-101A can be acquired for as little as $850/month…..and saves you money by out performing at least 3 operators while returning a positive and instant cash flow in excess of $6,000/month (approximately $75,000/year). Ask for our R.O.I. calculator. This handy one page spread sheet will demonstrate the cost saving and rapid pay back of the KISS-101A system….