ACE Production Technologies - Selective Soldering, Lead-Free, Mini-Wave, Connector Rework

KISS-101A

The KISS-101A is "Benchtop" automated selective soldering machine. It is the lowest cost of any machine available anywhere.......Yet, completely automated. The KISS-101A includes the following standard features:

STANDARD FEATURES:

· Universal PCB location rails.

· Lead alloy solder pot and pump assembly (lead free available).

· Precision flux applicator.

· Look-up programming camera (used for fiducial location)

· Heated Nitrogen to the solder nozzle.

· PC with Windows XP O/S.

· Rapid setup and time to "first production" using the machine "teach" functions.

· 6mm and 12mm "Bullet" nozzles.

· Programmable solder wave flow rate.

· Set the time/temp profile for each individual component type for maximized process control and TAKT time.

· Absolute control over all critical process parameters:

- Solder temperature interlocked to within 2 degrees C.
- Height, and travel speed of the solder wave.

- Programmable initial pre-heat soak time

· Will Process PCBs 12" x 12" unassisted

· Step and repeat capability in both X and Y axis for multiple boards in a panel.

· Set-up kit containing all necessary support tools.

· One year guarantee covering the entire machine and two years for the solder pot and pump assembly.

PROCESS OVERVIEW:

The operator places the PCB onto the location rails and starts the automated cycle. The cycle begins by automatically applying flux to all the programmed sites. Next the mini solder wave is automatically moved under the component to be soldered. The solder nozzle raises to "wet" the first pins. The solder wave travels the length of the component soldering the through hole leads to the PCB. At the completion of the travel the solder pot lowers and moves to the next site. All programmed sites are soldered in the same cycle. An automated stepping function allows solder arrays of boards in an X-Y matrix. After completing the cycle the pot returns to the start position ready for the next cycle.

JUSTIFICATION / ROI:

The KISS-101A can be acquired for as little as $750/month…..and saves you money by out performing at least 4 operators while returning a positive and instant cash flow in excess of $8,000/month in labor savings (approximately $100,000/year). Ask for our R.O.I. calculator. This handy one page spread sheet will demonstrate the cost saving and rapid pay back of the KISS-101A system….